WiFi thermal printer

188,384.00 TZS

Power consumption: less than or equal to 10WWorking temperature: 0-50 degreesPrinting speed 70 mm / sWorking power supply: DC5V/2ACommunication method: network connection, local connectionConsumable type: thermal paper (width 57 mm)Instructions:When...

Power consumption: less than or equal to 10W
Working temperature: 0-50 degrees
Printing speed 70 mm / s
Working power supply: DC5V/2A
Communication method: network connection, local connection
Consumable type: thermal paper (width 57 mm)

Instructions:
When there is no network, use local printing, flip the switch to enter local mode, and use G2 as a WiFi hotspot for connection printing.
In the network environment, select cloud printing, mode, toggle the switch to enter the cloud mode, and configure the network for the Cuckoo machine. At this time, it is the same as the G1 printing mode.


Dust or wipe clean with a cloth dampened with water once a week. Be sure not to leave water spots on the surface. These water spots will dry and could possibly leave permanent marks. Clean stains/spots using the following steps: Dampen a soft cloth with a mixture of hot water and liquid dishwashing detergent. Wring the cloth as much as possible to remove excess liquid. Rub the surface lightly in a circular motion. Dry the surface immediately with a clean, soft towel.